Clearstream P20D Alternative Submersible Septic Water Pump
Important Info
When replacing these Water Pumps, the pump float must also be replaced. We will not warranty these water pumps if the float is not purchased.Important Info
When replacing these Water Pumps, the pump float must also be replaced. We will not warranty these water pumps if the float is not purchased.This reliable septic pump is a bottom septic pump that is ½ hp and discharges 20 gallons per minute. The Clearstream P20D Replacement Submersible Septic Tank Water Pump comes with a 10-foot lead, so you do not have to add any wire. The 10-foot lead should allow you to install this septic tank with plenty of wire to do the job.
The water cools down the motor as it is working. This unprecedented cooling structure extends the life of the pump.
Clearstream products are known for being extremely reliable. With proper maintenance, they can last for years, and sometimes decades. This specific pump comes with a one-year warranty. If anything happens to your Clearstream P20D Replacement Submersible Septic Tank Water Pump, it will be replaced or repaired.
The Clearstream P20D Replacement Submersible Septic Tank Water Pump is identical in size and shape to your original Clearstream P20D, and is a plug and play replacement. You should be able to replace it yourself as a DIY project.
You (the customer) are responsible for making sure you are following all applicable laws and regulations in your area before replacing your septic air pump yourself.
Clearstream and P-20D are Registered Trademarks of Clearstream wastewater inc. Under no circumstances is Wholesale Septic Supply representing to the general public that it is an Authorized Distributor, Dealer, or is affiliated with those companies with whom we make product comparisons or with any products we sell.
Voltage | 115 |
Gallons Per Min | 20 |
Discharge Size | 1.25 inch |
One Year Warranty with the purchase of a Float Switch
Warranty covers manufacturer defects only
P/N: FRE-EFP-CBS0512015-N01
Can the P20X be used in leu of the P20D? Design wise, they look the same. The P20D is 115v and 9.5amps. Do you have more detailed specs of the P-20X?
Yes, this is a direct replacement for the P20D same specifications amp draw, GPM, and voltage. It's a plug and play unit you need to buy a new control float for it as well that is the bottom float switch.
I have this model in my septic. My septic filled up and pump quit working (alarm was activated). I bypassed the float switches and pump just hummed. I removed the pump and the screen was pretty clogged. cleaned everything and tried it again with no luck. I pulled the pump apart and found the impellers had friction welded together due to no flow. I removed the impeller stack and the motor ran fine. Is there a replacement kit for the impeller section.
No there is no impeller kit for these pumps you have to buy a completely new effluent pump.