Important Info
Please use the riser sizer below for any sizing questions you may have. This calculator should answer any and all questions.PLEASE NOTE: Septic Riser Kits Come Supplied with (1) one tube of riser tar sealant
Our septic tank riser kits are measured by their inner diameter and height. The first number in their names is their inner diameter in inches, and the second number is their height in inches. This means that a 24’’x 2’’ riser kit has an inner diameter of 24 inches and a height of 2 inches.
The bottom ring of the riser kit is what attaches the assembly to the septic tank. There must be enough area around the access port to properly attach the ring to the septic tank. For example, a 24’’x 2’’ kit has an adapter ring that has an inner diameter of 24 inches and an outer diameter or 30 inches. That means the maximum distance across the access port must be 24 inches or less, and the top of the septic tank must be large enough to allow a ring with a 30-inch outer diameter to seal to it.
If the adapter ring is secure, it is okay for the riser system is a little larger than the hole.
The Tuf-Tite Septic Tank Riser Kit is the answer to simplifying access to your septic tank and enhancing the overall efficiency of your septic system. This kit is an indispensable addition for homeowners and professionals looking to make septic maintenance a breeze. Here's why it's a must-have:
*Above is a picture drawing of the dimensions of the base for the kits*
*Concrete lids are to be removed after the installation of your new riser kit*
Be the first to ask a question about this.
