Omron Timer H3CR-F8
The timer is used in drip systems and timed dosing systems.
SKU OMR-CPP-H3C
The Omron time delay timer is a timer with an on/off function that can be set in half seconds, seconds, minutes and hours. Because of its multiple settings, it is highly flexible and the most widely adopted timer for timed dosed applications in septic systems.
Relay output is DPDT and volts are 100-240VAC and 100-125VDC.
Rated power supply voltage | 100 to 240 VAC 50/60 Hz100 to 125 VDC Ripple 20% max. (If power supply incorporates a single-phase full-wave rectifier) |
Allowable voltage variable range | 85 to 110% of the power supply voltage |
Power consumption | Approx. 10 VA (at 240 VAC)Approx. 2.1 W (at 240 VAC) |
Reset voltage | 10% max. of rated supply voltage |
Number of time ranges | 18 |
Operation mode | Flicker OFF start |
Control output (Type) | Time-limit: DPDT |
Control output (Contact output) | Resistivity load: 250 VAC 5 A (cosφ=1)/5 A at 30 VDCMinimum applicable load: 10 mA at 5 VDC (failure level: P Reference value) |
Operating resetting | Time-limit operation/Time-limit reset or Self-reset |
Ambient temperature range | Operating: -10 to 55 ℃ (with no icing)Storage: -25 to 65 ℃ (with no icing) |
Ambient humidity range | Operating: 35 to 85% |
Accuracy of operating time | ±0.2% FS max.±0.2% ±10 ms in a range of 1.2 s and 3 s |
Be the first to ask a question about this.